01Section
Fleet Specs
Modern high-capacity hydrovac trucks — 12 cu yd spoils/debris tanks, 1,200-gallon fresh water tanks, 3,000 PSI water pressure, 25-ft boom, 8-in tube, 6,400 CFM blower, 27 inHg vacuum, 19.4 GPM pump, 300-ft remote hose, heated water, cabinets and lines for cold-weather excavation. Backed by 30+ years of underground construction experience.
01 / 3
TruVac APXX
Heavy-Duty Production Truck
×202 / 3
Vermeer VXT600
High-Capacity Production Truck
×203 / 3
TruVac HXX
Extended-Reach Specialist
5 trucks in the fleet — 1 × TruVac APXX · 2 × Vermeer VXT600 · 2 × TruVac HXX
02Section
Built for Capacity
Every truck in the fleet is spec'd to minimize downtime and maximize output on your jobsite.
3,000 PSI
Water Pressure
Cuts through clay, rock, and frozen ground
6,400 CFM
Blower Flow
High-flow evacuation keeps every cut clean
27 inHg
Vacuum Level
Strong, consistent suction at depth
19.4 GPM
Water Pump
Steady cutting flow on every dig
25 ft
Boom Reach
Dig from the shoulder, not the trench
8 in
Tube Diameter
Moves heavy slurry without clogging
12 yd³
Debris Tank
Fewer trips, faster turnaround
1,200 gal
Fresh Water
Long run times between fills
180°F+
Heated System
Heated water, cabinets & lines for winter digs
300 ft
Remote Hose
Reach where the truck can't
12.4 ft
Low Profile
Clears tight overhead clearances
40,000 lbs
Operating Weight
Road-legal, bridge-friendly weight
Reserve a truck for your project.
24/7 dispatch backed by our rapid mobilization guarantee — tell us the scope and we'll roll the right rig fast.